10 Most Commonly Replaced Case IH Cotton Picker Parts

The most commonly replaced parts on your Case IH cotton harvesting machine will generally be the ones which have the most moving parts, simply because of the forces they are exposed to. For instance, heat, friction, and torque are forces generally in effect when moving parts are functioning, and those forces can contribute significantly to the accelerated wear and tear which occurs on those parts.

This is not any kind of reflection on the quality of materials used, or on manufacturing methods, it is simply a fact of life which happens because there is so much stress being applied to the parts. The Case IH aftermarket parts which we can supply you with at Certi-Pik, USA, are at least as good as your original parts, so you won’t have to be concerned about any dropoff in quality or reliability. Since we work with many of the best manufacturers in the world for cotton harvesting machine parts, we can always supply you with the best available replacements when you need them.

10 Most Commonly Replaced Parts

As mentioned above, the parts which need replacement most often on Case IH cotton harvesting machines are those which are in motion the most, and which are exposed to destructive forces which tend to wear them down. Since we’re aware that these parts require more frequent replacement, we tend to keep more of them in our huge inventory of parts, and that means you should not have any delays when ordering any of these parts when the time comes. Here is a rundown of those components on a cotton harvester which typically require the most frequent replacement:

• Any parts in the Case IH picking unit system
• Case IH belts
• Moistener pads and columns
• Spindle nuts
• Cam tracks
• Idler gears
• Stalk lifters
• CTX scrapping plates
• Picker and grid bars
• Lubrication hoses

Miscellaneous Parts

While the miscellaneous parts on your cotton harvester might not belong to any critical systems of the equipment, they all serve a useful and important role in the efficient operation of your machine. Whenever any of these components is due for replacement, or if they have just become worn out with long hours of usage, you can order any of these components from us at Certi-Pik, USA, and you can then expect prompt delivery of your parts.

Picking Unit Cabinet

A lot of important functions happen in your picking unit cabinet, and that means you’ll need to be sure that all of the components are in good working order, and don’t have any issues before you put your harvester in the field. When you do notice worn parts, or if something happens during harvesting operations in the picking unit cabinet, you can contact us and have a high quality replacement part on its way to you in very short order. You will have minimal downtime, because our shipping methods will ensure that the parts you require arrive in the fastest way possible.

Picking Unit System

There are quite a few components which comprise the picking unit system on your cotton harvester, and all of these are essential to an efficient operation. To make sure that your picking unit system is able to operate effectively throughout the harvest season, make sure to look for any worn parts, and let us know which ones you need, so you can start the season 100% ready.

Water Systems

If the water system isn’t functioning correctly on your Case IH cotton harvester, it’s very possible that your machine could get bogged down with residue accumulation. In order to prevent that from happening, make sure you have all the component parts of your water system on hand in case replacements are needed. We can supply all the parts you need at Certi-Pik, USA.

Air Systems

One of the main components of the air system in your cotton harvesting machine are some of the fans which are needed to keep things moving, and to prevent choke problems. One of the parts on your cotton harvester which has constantly moving components are the fans in your air system, so these should be continually checked for excessive wear.

Belts

Another of the components which typically undergoes a great deal of movement when operational are each of the belts in your Case IH harvesting machine. There are quite a few rubber belts which are used in a typical harvester, and even though they’re all built to be rugged and long-lasting, each of them will eventually wear out because they’re in constant motion.

When you need to replace any of the belts on your harvester, make sure to give us the right part number so we can supply you with the correct belt. Since each of these belts has a specific purpose, it is designed and built to certain specifications. When we have the right part number, we can get you the appropriate belt you need to keep your cotton harvesting machine in the field, and efficiently bring in this year’s harvest.

High Quality Aftermarket Parts When You Need Them

The parts listed above may be the ones which most frequently need replacement on cotton harvesting machines, but they certainly are not the only ones. Whatever parts you have on your Case IH machine that need to be replaced, chances are we’ll have it in stock, and we can ship out a high-quality replacement for you on that same day, or at the latest, the following day. In the middle of the harvesting season, you simply can’t afford to tolerate downtime from your equipment, so keeping it in the field and operating is an absolute must.

Contact us to place your order using any one of several convenient ordering methods, and as long as you can provide us with the correct part numbers, we will be able to deliver the parts you need very quickly. Since we routinely use the best available shipping methods, you can count on prompt delivery, so you’ll be able to get your equipment up and running, and so you can bring in the harvest. With the high-quality Case IH aftermarket parts that we provide, you won’t lose valuable time getting reliable parts installed in your harvester.